Berkongsi:
Spesifikasi
SKU: 4000259
*It is based on a newly developed acrylic polymers and it is dramatically reduces solar heat absorption in either air-conditioned or non-air conditioned buildings.
*It takes the majority of the heat load off a building's skin and reduces temperatures to approximately that of outside shade.
Advantages :-
• Low VOC
• Water based and non-formaldehyde.
• UV protection
• No blistering, cracking and peeling.
• Chemical resistant and waterproof.
• User friendly, suitable use on any surface.
• Adheres well over, galvanized and metal roofs, wood, asphalt or aluminium coatings,
polysty-rene foam insulation, polyester plastic panels, precast flat concrete and barrel cement tiles and many roofing
materials.
• Prevention of ravages of acid rain, freeze-thaw, cycles, sunlight, bacteria and fungus include:-
• RC gutter• RC planter boxes• Floor slabs• External decks, landscaped area• External wall• Wood siding / fences
• RC flat roof• Metal / steel roof• New / old masonry and concrete• Terraces, balconies and services yards
Surface Preparation
Surface must be sound, dry and clean (free of dirt, gravel, pollution, mildew and all foreign material). Apply if any rain is imminent. Repair flashings and damaged areas. Cracks and old bitumen joints shall be repaired first.
Application
Substrate should be primed with a 1:3 mixture of PENTENS T-007 and water. Brush on at the approximate rate of 0.3 kg/m². PENTENS T-200 is suggested to apply at least 2
coats. The first coat should be applied in one direction only. If possible the second coat should be applied at right angles to the first.
Leave to cure for approximately 8 hours before applying second coat. PENTENS T-200 can be installed with conventional airless spray equipment, brush or roller.
Pertanyaan - PENTENS FLESEAL T-200H 4.5KG (WHITE)
Lihat lebih banyak
Penyelesaian Kalis Air
